JLG 1100SB Operator Manual - Manual (Page 77)

SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
3121264 – JLG Lift – 6-1
SECTION 6. GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
6.1 INTRODUCTION
This section of the manual provides additional necessary
information to the operator for proper operation and mainte-
nance of this machine.
The maintenance portion of this section is intended as infor-
mation to assist the machine operator to perform daily main-
tenance tasks only, and does not replace the more thorough
Preventive Maintenance and Inspection Schedule included
in the Service and Maintenance Manual.
Other Publications Available:
Service and Maintenance Manual ............................ 3121265
Illustrated Parts Manual ............................................ 3121266
6.2 OPERATING SPECIFICATIONS
Table 6-1. Operating Specifications
Maximum Work Load (Capacity)
Unrestricted
Restricted
500 lb (230 kg)
1000 lb. (450 kg)
Max.Vertical Platform Height (Unrestricted) 110 ft. (33.5 m)
Max.Vertical Platform Height (Restricted) 110 ft. (33.5 m)
Max.Horizontal Platform Reach (Unrestricted) 76 ft. (23.1 m)
Max.Horizontal Platform Reach (Restricted) 68 ft. (20.7 m)
Maximum Wind Speed 28 mph (12.5 m/s)
Maximum Manual Force 100 lb (450 N)
JibPLUS
Length
Horizontal Motion
Vertical Motion
8ft. (2.44m)
180° working, 244° stowed
130° (+75/-55)