JLG 1100SB Operator Manual - Manual (Page 78)

SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
6-2 – JLG Lift – 3121264
Dimensional Data Chassis
Table 6-2. Dimensional Data
Overall Width
Axles Retracted
Axles Extended
8ft. 2in. (2.49 m)
12ft. 6in. (3.8 m)
Stowed Height 10ft. (3.04 m)
Stowed Length (Transport Mode) 38ft. 11in. (11.86 m)
Stowed Length (Working Mode) 48ft. 11in. (14.91 m)
Wheelbase 12ft. 6in. (3.81 m)
Tailswing 5ft. 6 in. (1.6 m)
Ground Clearance (Axle) 12 in. (30.4 cm)
Ground Clearance (Chassis) 25.5 in. (64.7 cm)
Table 6-3. Chassis Specifications
Maximum Travel Grade With boom in
stowed position (Gradeability) 45%
Maximum Travel Grade With boom in
stowed position (Side Slope) 5°
Maximum Elevated Operating Slope 3°
Turning Radius (Axles Retracted)
Outside
Inside
22 ft. 6 in. (6.8 m)
14 ft. 5 in. (4.4 m)
Turning Radius (Axles Extended)
Inside
Outside
8 ft. (2.4 m)
19 ft. 4 in. (5.9 m)
Max Tire Load 26,250 lbs. (11,907 kg)
Max Ground Bearing Pressure 105 psi (7.38 kg/cm 2 )
Maximum Drive Speed 3.25 mph (5.2 kph)
Max. Hydraulic System Pressure 4600 psi (317 Bar)
Electrical System Voltage 12 Volts
Gross Machine Weight (Platform Empty) 44,750 lb. (20,298 kg)