JLG 1100SB Operator Manual - Manual (Page 91)

SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
3121264 – JLG Lift – 6-15
8. Suction Strainers (In Tank)
Lube Point(s) - 2
Interval - Every 2 years or 1200 hours of operation.
Remove and clean at time of hydraulic oil change.
9. Oil Change w/Filter - Deutz
Lube Point(s) - Fill Cap/Spin-on Element
Capacity -
5 Quarts (4.5 L) Cooling System
11 Quarts (10.5 L) w/Filter
16 Quarts (15 L) Total Capacity
Lube - EO
Interval - Check level daily; change every 500 hours or six
months, whichever comes first. Adjust final oil level by
mark on dipstick.