2N Helios IP Automation v2.5 - Manual (Page 10)

10
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Example
Event.CodeEntered: Code=12345
Event.CardEntered
The block defines the event generated by entering of the RFID card with CardEntered
the defined ID (for RFID card reader models only).
Parameters
Card
Define the RFID card ID; refer to the Card Reader subsection in the 2N Helios IP
®
. Configuration Manual
Valid values:
valid – any valid card (included in the intercom card list)
invalid – any invalid card
SuppressTones
Suppress sound signalling initiated by detection of an invalid card. The parameter is
optional.
Valid values:
0 – tones are not suppressed
1 – tones are suppressed (default value)
Example
Event generated by entering of a card with ID 0*0012456:
Event.CardEntered: Card=0*0012456
Event.CallStateChanged
The block defines the event generated by a call state change (call CallStateChanged
ringing, call connection, call termination, etc.)