Actions, Action.activateswitch, Parameters – 2N Helios IP Automation v2.5 User Manual
Page 15
15
4. Actions
2N Helios IP Automation
®
defines the following types of actions:
–
ActivateSwitch – switch activation
SetOutput – digital output state setting
BeginCall – outgoing call setup
AnswerCall – incoming call answer
EndCall – call termination
SendHttpRequest – HTTP command sending
Action.ActivateSwitch
The
block defines the action necessary for activation of the intercom
ActivateSwitch
switch as configured in the Switch 1 – 4 tags. The activity to be performed depends
fully on the particular switch settings (digital output activation, HTTP command
sending, etc.). Switch deactivation is controlled by the switch settings too.
Parameters
Event
Define the event to launch the action.
Condition
Define the condition to be met to execute the action. This parameter is optional.
Switch
Define the switch to be activated (1 to 4).