2N Helios IP Automation v2.5 - Manual (Page 29)

29
2N TELEKOMUNIKACE a.s., www.2n.cz
®
7. Examples of Use
Calling to Dispatching Office in Case of Unauthorised
Door Opening
Specification
Call the selected telephone number whenever the tamper switch is disconnected
(device opened).
Block diagram
The rising edge on the tamper input (1: Event.InputChanged) initiates calling to the
defined telephone number (2: Action.BeginCall).
Intercom settings
1: Event.InputChanged: Input=tamper
2: Action.BeginCall: Number=1111; Event=1
Calling to Dispatching Office in Case of Unauthorised
Door Opening with Service Code Blocking Option
Specification
Call the selected telephone number whenever the tamper switch is disconnected
(device opened). Enable blocking and re-enable numerical code alarm entered from the
intercom keypad.