2N Helios IP Automation v2.5 - Manual (Page 21)

21
2N TELEKOMUNIKACE a.s., www.2n.cz
®
State
Define the required profile state. This parameter is optional.
Valid values:
active – active profile (default value)
inactive – inactive profile
Example
The condition is met for inactive time profile 1:
Condition.ProfileState: Profile=1; State=Inactive
Condition.CallState
The block defines the condition to be met in the case of a defined state of CallState
the currently made call.
Parameters
State
Define the call state.
Valid values:
idle – call is not being made
ringing – ringing in progress
connected – call connected
Direction
Define the call direction.
Valid values:
incoming – incoming calls
outgoing – outgoing calls
any – both directions
The parameter is optional, the default value is . any