2N VoiceBlue MAX v1.1 - Manual (Page 93)

93
2N TELEKOMUNIKACE a.s., www.2n.cz
®
4.7 Tracing
2N VoiceBlue MAX
®
allows for operation tracing (VoIP, SIP, GSM). Tracing is
accessible in one session only at a time, the other tracing requests are rejected with
BUSY. With regard to a rather extensive volume of data, we recommend that the
function should be activated before tracing. Any Write communication into file
Telnet–supporting terminal (HyperTerminal, Putty, etc.) can be used.
Tip
You are advised to synchronise your GSM gateway with the SIP
Proxy, or a PC before tracing.
AT Command Description
AT%S92=x Set the tracing details. Refer to the table below for value X.
AT!R2 Start tracing via the active session.
Any character Terminate tracing.
Layer 3 and 4
Status Listing Timestamp
Write–Out SMP Packet
Write–Out Layer 2 Status
Listing LCR
Listing
1 2 4 8 16
The resultant value X is a sum of the required functions (X= timestamps+LCR = 16+2
= 18, e.g.).