AirLive G.DUO - Manual (Page 105)

9. System Configuration Menu
AirLive G.DUO User’s Manual 98
9.2.1 DHCP Settings
„ DHCP Service: You can enable or disable DHCP server here.
z Disable: Disable DHCP server
z Client: The LAN interface will get IP address from DHCP server
z Server(default); The G.DUO will act as DHCP server to provide IP
addresses to the clients on the LAN/Wireless interface. By default, the
DHCP server is on.
„ DHCP Client Range: You can define the IP pool from which the DHCP clients can
get IP address.. Click on “Show Clients” to see the current DHCP client table.
„ DHCP Release Time: You can define how long the G.DUO will reserve IP
address for a particular PC or Device here.
9.2.2 802.1d Spanning Tree
Enable this will prevent forming of network loop.
9.2.3 Clone MAC Address
You can change the MAC address of your LAN port to other value here.
9.2.4 Disable PING
If you do not wish the G.DUO to respond to remote PING command, please disable it
here.
Device IP
Settings
DHCP
Settings