AirLive G.DUO - Manual (Page 19)

3. Configuring the G.DUO
AirLive G.DUO User’s Manual 12
3.2 Prepare your PC
The G.DUO can be managed remotely by a PC through either the wired or wireless network.
The default IP address of the G.DUO is 192.168.1.254 with a subnet mask of
255.255.255.0. This means the IP address of the PC should be in the range of
192.168.1.1` to 192.168.1.253.
To prepare your PC for management with the G.DUO, please do the following:
1. Connect your PC directly to the LAN port on the DC Injector of G.DUO
2. Set your PC’s IP address to “Obtain an IP address Automatically”. The G.DUO should
provide your PC an valid IP address.
3. If you want to set your PC’s IP address manually, please set to 192.168.1.50 (or other
address in the same subnet)
You are ready now to configure the G.DUO using your PC.
3.3 Management Interface
The G.DUO can be configured using one the management interfaces below:
Web Management (HTTP): You can manage G.DUO by simply typing its IP address
in the web browser. Most functions of G.DUO can be accessed by web management
interface. We recommend using this interface for initial configurations. To begin,
simply enter G.DUO’s IP address (default is 192.168.1.254) on the web browser..
50