AirLive G.DUO - Manual (Page 39)

4. WISP + AP Mode
AirLive G.DUO User’s Manual 32
„ Clone MAC Address: In this place, you can assign a MAC address for the WAN
port. In case of WISP mode, it is Radio1’s MAC address. For Gatway mode, it
is the WAN/LAN1 MAC address.
„ Enable UPnP: Check this field will enable Universal Plug n Play protocol
„ Enable Web Server Access on WAN: Check this field will enable remote
management from WAN side.
4.3.7 Virtual Server Settings
Virtual server allows you to specify one or more applications running on server computers
on the LAN that may be accessed by any Internet user. Internet data destined for the
specified public port will be directed to the specified private port number on the LAN client
with the specified private IP address.
If you want to allow your web server, ftp server, or email server to be accessible from
Internet, you would need to open specific port on the virtual server to your local IP address.
For a list of most frequent used TCP and UDP ports. Please visit
http://en.wikipedia.org/wiki/List_of_TCP_and_UDP_port_numbers
4.3.8 DMZ
Advanced Settings >> Multiple DMZ
DMZ opens all TCP/UDP ports to particular IP address on the LAN side. It allows setting
up servers behind the G.DUO.