AirLive G.DUO - Manual (Page 109)

9. System Configuration Menu
AirLive G.DUO User’s Manual 102
messages are generated (by the router) and sent to in the network. You can define
up to 3 trap servers in the system.
9.7 Watchdog
System Configuration -> Watchdog
The Ping Watchdog will ping remote IP addresses to make sure the wireless connection is
active, if not, it can either reconnect or reboot. To prevent the AP from power recycling,
the PING watchdog will start 10 minutes after power up to prevent power recycle problem.
„ Watch Interval: means: "How often the CPE will PING". For example, it will PING
once every "1" minute.
„ Watch Host: This is the IP address for which the Watchdog will ping.
„ Watchdog Actions: if the Watch Host fail to respond to PING. Then one of the
action below will be taken.
„ Reconnect: the G.DUO will attempt to re-establish the connection.
„ Reboot: the G.DUO will do a power recycle.
9.7.1 Firmware Upgrade
System Configuration -> Firmware Upgrade
You can upgrade the firmware of your G.DUO (the software that controls your G.DUO’s
operation). Normally, this is done when a new version of firmware offers new features that
you want, or solves problems that you have encountered with the current version.