AirLive G.DUO - Manual (Page 25)

3. Configuring the G.DUO
AirLive G.DUO User’s Manual 18
menu category. For explanation of different wireless modes, please refer to
Chapter 1.
„ System Configuration: All non-wireless and router mode settings are in this
category. The system configurations including changing password, upload
firmware, backup configuration, settings PING watchdog, and setting management
interface. We recommend you should enable password protection during the first
time login.
„ Device Status: This section for monitoring the status of G.DUO. It provides
information on device status, Ethernet status, wireless status, wireless client table,
and system log.
„ Language Selection: You can change the language for the Web interface from
here.
3.5 Initial Configurations
We recommend users to browse through G.DUO’s web management interface to get an
overall picture of the functions and interface. Below are the recommended initial
configurations for first time login:
3.5.1 Choose the wireless Operation Modes
The wireless settings of G.DUO are dependant on the wireless operation mode you choose.
Therefore, the first step is to choose the operation mode. For explanation on when to use
what operation mode, please refer to Chapter 1
Click to configure wireless settings
Current Mode
Mode Diagram