AirLive G.DUO - Manual (Page 26)

3. Configuring the G.DUO
19 AirLive G.DUO User’s Manual
Mode Diagram: this shows you the operation flow between Radio1, Radio2, and the
LAN/WAN ports. It helps you to understand how the mode works.
Current Mode: The active setup button indicates the current operation mode. When
you press the “Setup Button”, it will bring you to the wireless setting page.
Changing Mode:
Follow the example below to change to “Gateway+AP” mode
1. Select “Gateway + AP” mode.
2. Click on “Setup Button” button
3. The AP might ask you to confirm the mode change. Once confirm, the AP will
reboot to its new mode.
3.5.2 Change the Device’s IP Address
The default IP address is at 192.168.1.254. You should change it to the same subnet as
your network. Also, if you want to manage G.DUO remotely, you have to set the Gateway
and DNS server information.
To setup the IP settings for G.DUO, please select “System Configuration” -> LAN Interface
Setup”. After entering the IP information, click on “Apply” to finish.
2 1