AirLive G.DUO - Manual (Page 97)

8. WDS + AP Mode
AirLive G.DUO User’s Manual 90
8.2.5 Signal Survey
Operation Mode -> Setup -> Site Survey -> Signal Survey
The Signal Survey will continuously display the Signal Strength of the selected SSID for
antenna alignment purpose. To use Signal Survey function, please enter the “Site
Survey” function first; please refer to the instruction in the above section. Once you select
the ESSID and click on the “Signal Survey” button, the following screen will appear.
„ BSSID: This is the remote AP’s MAC address.
„ Channel: The current scanned channel
„ Signal: This is signal strength number in percentage in 0 to 100 scale. The
higher the number, the better signal.
8.2.6 WDS Settings
For Bridge network, it is required to enter the Wireless MAC address of all remote
bridges that is connect directly to your G.DUO. The wireless MAC address is also
known as BSSID that is display on your site survey result.
„
MAC Address: Please enter the Wireless MAC address or BSSID of the remote
Bridge. You can usually find it at remote Bridge’s device label.
„ Comment: If you input anything that will help remind you about which remote
Bridge it is.