AirLive G.DUO - Manual (Page 58)

6. Client + AP Mode
51 AirLive G.DUO User’s Manual
In this chapter, we will explain about the wireless settings for Client + AP Mode. Please be
sure to read through Chapter 1.4 and Chapter 3’s “Introduction to Web Management” and
“Initial Configurations”
first.
It is highly recommended that you use directional antenna for Radio1 in this mode to
achieve larger coverage and avoid mutual interference. If you need to use the supplied
2dBi omni antennas, please adjust them according to the diagram below:
6.1 Application for Client + AP Mode
In this mode, the Radio1 is acting as wireless client to remote AP. Radio2 is performing as
an Access Point. This mode is best used as a wireless repeater to extend the signal from
remote Wireless Router.
6
6.
Client + AP Mode