AirLive G.DUO - Manual (Page 31)

4. WISP + AP Mode
AirLive G.DUO User’s Manual 24
4.2.2 Configuration Steps
Radio1
Step1: Click on the wireless settings on WISP+AP mode. It should bring you to the
“Wireless Setting” Page.
Step2: Click on “Site Survey” Setup button. The following screen should appear with results
of available APs in the area.
Step2: Now select “Outdoor AP” on the list, then press “Signal Survey”. Adjust your
antenna until the signal level is at the highest.
Step3: Now close the window and go back to the “Site Survey” page. Select the “Outdoor
AP” and press the “Connect” button. The G.DUO will inform you “encryption type
mismatch!” and ask if you want to configure the encryption setting. Select “Yes” to
proceed.