AirLive G.DUO - Manual (Page 27)

3. Configuring the G.DUO
AirLive G.DUO User’s Manual 20
3.5.3 Enable Password Protection
The G.DUO’s password protection is turned off by default. You should enable it and set
your own password. To enable password protection, please go to “System Configuration”
-> “Password Settings”
menu. Then enter your username and password, and click on
“Apply Change” button. You can also come to this menu to change your password in the
future.
3.5.4 Enable Telnet or SSH
The Telnet and SSH management interface are turned off by default. If you wish to use
them, please go to the “System Configuration -> System Management” menu. Check
“Telnet” or “SSH”, then click on “Apply Change” button.
1
2
3