AirLive G.DUO - Manual (Page 108)

9. System Configuration Menu
101 AirLive G.DUO User’s Manual
CLI (Command Line Interface):
You can enable or disable Telnet and SSH management interface from here.
Public Key Upload: You can upload your public for the SSH authentication here.
System Timeout Value: This is the time the AP will wait when there is no configuration
activity, then it will log out the user. We strongly recommend to leave the value at zero.
9.6 SNMP Settings
System Configuration -> SNMP Settings
The G.DUO’s SNMP management is OFF by default. You should come to this page to
enable the SNMP management. The G.DUO supports RFC-1213MIB and SNMPv2 MIB.
„ System Name: A name that you assign to your G.DUO. It is an alphanumeric string of
up to 30 characters.
„ Read Community: If you intend the router to be managed from a remote SNMP
management station, you need to configure a read-only “community string” for
read-only operation. The community string is an alphanumeric string of up to 15
characters.
„ Read/Write Community: For read-write operation, you need to configure a write
“community string”.
„ Trap Server:
A trap server is a remote SNMP management station where special SNMP trap