AirLive G.DUO - Manual (Page 33)

4. WISP + AP Mode
AirLive G.DUO User’s Manual 26
Step3: Go to the “Security” setup and set your encryption as “WPA”->”Pre-Shared
Key”->”TKIP”. Enter your encryption key. .
4.3 Radio1: WISP Router Mode Settings
The Radio1 is working in Client Mode with NAT routing function, it is also known as “Client
Router”. The WAN is on the wireless side.
When you select “Radio1” as the interface, the following screen will appear.
4.3.1 Basic Wireless Settings
„ Band: You can choose between “802.11g/b”, “802.11g”, or “802.11b”. We
recommend to leave the setting at “802.11g/b”.
„ SSID: The SSID setting of the remote AP. If you are not sure, you can click on
“Site Survey” button to scan for AP.
„ Channel: Wireless Channel used. For EU, it is channel 1~13. For U.S.A., it is
channel 1~11. For Client and WISP mode, this field is applicable only in Adhoc
mode.