AirLive POE-5010HD - Manual (Page 11)

2. Package Contents
AirLive POE-5010HD User’s Manual 7
2. GPIO/RS-485: Connect to a local keyboard controller.
„ DI/ DO: Connect to sensor in and alarm out devices
Cable for I/O connectors:
PIN SPECIFICATION
1 Ground (Common) GND
2 GPIO Out #1 Close circuit current maximum: 70mA AC or 100mA
Output resistance: 30 ohm
Open circuit voltage maximum: 240V AC or 350V DC
3 GPIO In #1
4 GPIO In #2
Action high voltage: 9~40 VDC
Dropout voltage: 0 VDC
5 AC24V Power Input
6 AC24V Power Input
AC power: 24V
7 RS-485 TX+
8 RS-485 TX-
Compliant to RS-485
3. DC-in Jack: The input power is 12VDC.
Note that supply the power to the Network Camera with the power adapter included in
package.
4. Audio I/O Connectors
„
MIC in (audio in): Connect a microphone to the network camera.
„ Line out (audio out): Connect a loud speaker to the network camera. This
function is for voice alerting and two-way audio.
5. Iris Level: It is used only when the DC-Iris lens is connected to the camera. This
screw-knob allows you to adjust the brightness of the video images from the DC-Iris
lens.
6. SD Card Slot: SD Card Slot allows you to insert a memory card for expansion of
storage.