AirLive POE-5010HD - Manual (Page 5)

1. Overview
AirLive POE-5010HD User’s Manual 1
1
1.
Overview
This user’s guide explains how to operate this camera from a computer. User should read
this manual completely and carefully before you operate the device.
1.1 Introduction
Thank you for purchasing the PoE H.264/MPEG4/MJPEG Full High Definition Mega Pixel
Network Camera, a standalone system that can be connected directly to an Ethernet or
Fast Ethernet network.
Equipped with a powerful 5 Mega pixel color CMOS sensor, the camera allows you to
capture a wider field of view with a resolution of up to 2592 x 1920 resolution. With support
for latest H.264 technology, you can record streaming video that utilizes high quality H.264
images to your hard drive, enable motion detection and setup automated e-mail alerts for
security.
The camera supports external DC-Iris lens, which provides the power and control signal
required for adjusting the lens through the DC-Iris connector (4-pin) on the side panel of the
camera. You can attach any standard DC-Iris lens for specific purpose, such outdoor
applications. In addition, the camera can attach a variety of external devices for your
specific purposes through the GPIO connectors.
Compared to the conventional PC camera, this camera features a built-in CPU and
web-based solutions that can provide a cost-effective solution to transmit the real-time
high-quality video images and sounds synchronously for monitoring. The camera can be
managed remotely, so that you can use a web browser to access and control it from any
desktop/notebook computer over the Intranet or Internet.
Compliant with IEEE802.3af PoE (Power over Ethernet) standard, the camera provides you
with more flexibility of camera installation according to your application. The camera can be
powered by the Ethernet, so that you can place the camera anywhere without a power
outlet supported.
Note: This product does not come with lens. It must be purchased separately.