AirLive POE-5010HD - Manual (Page 9)

2. Package Contents
AirLive POE-5010HD User’s Manual 5
Note: 1.) Using a power supply with a different voltage than the one included with the
Network Camera will cause damage and void the warranty for this product.
2.) This product does not come with lens. It must be purchased separately.
2.1 Connections
Front / Top / Side Panel
1. DC-iris Connector: It allows you to attach the DC-Iris lens (optional).
2. Reset Button: This button is used to restore the all factory default settings. Sometimes
restarting the device will make the system back to a normal state. However, if the
system still got problems after restart, user can restore the factory default settings and
install it again.
Restore the device:
(i) Press the button down continuously.
(ii) Hold the button at least 5s seconds and release it. Then the device has been
restored to default settings and reboot again.