AirLive POE-5010HD - Manual (Page 46)

5. Administrating the Device
AirLive POE-5010HD User’s Manual 43
to enable
of the camera. The camera provides three
detecting areas.
l n for the camera:
move the detecting area and change the area coverage.
3. Set the Percentage and Sensitivity (1~99) for detecting motion to record video.
Apply to save the settings and activate the motion detection function.
The Motion Detection option contains the commands and settings that allow you
and set up the motion detection feature
Fo low the steps below to set up the Motion Detection functio
1. Select Enable Motion Detection.
2. Select Window 1/2/3. When the detecting area is enabled, you can use the mouse to
4. When done, click
5.5.4 Recording
The
Enable ect the option to enable the SMB/CIFS server.
FS
- ser name to login into the Network Storage/CIFS server.
Recording option allows you to set up the recording schedule for the camera.
SMB/CIFS Recording: Sel
- SMB/CIFS Server: Enter the IP address of the Network Storage/CIFS server.
- Upload Path: Assign the path for uploading the files on the Network Storage/CI
server. For example, /Test/ .
Login Name: Enter the u
- Password: Enter the password to login into the Network Storage/CIFS server.