AirLive POE-5010HD - Manual (Page 32)

5. Administrating the Device
AirLive POE-5010HD User’s Manual 29
The IP Filter setting allows the administrator of the camera to limit the users within a certain
range of IP addresses to access the camera. Select the Enable Filter option and assign
the range of IP addresses that are allowed to access the camera in the Accept IP Address
field; or assign the range of IP addresses that are blocked to access the camera in the
Deny IP Address field.
For example, when you enter 192.168.0.50/192.168.0.80 in Start/End IP Address of
Accept IP Address and then click Add, the user whose IP address located within
192.168.0.50 ~ 192.168.0.80 will be allowed to access the camera. On the other hand, if
you enter the IP range in Start/End IP Address of Deny IP Address and then click Add,
the user whose IP address located within the range will not be allowed to access the
camera.
To remove the assigned range of IP addresses for IP Filter, select the setting in the
Accept/Deny IP List and then click Delete.
5.2.4 IP Notification
In case the IP address is changed, system is able to send out an email to alert someone if
the function is enabled.