AirLive POE-5010HD - Manual (Page 43)

5. Administrating the Device
AirLive POE-5010HD User’s Manual 40
TCP Server: Select Enable to enable the TCP server for the camera.
- TCP Server Address: Enter the IP address of the TCP server.
- TCP Port: Set port number of TCP server
NOTE Due to the network environment, the camera may not upload number of images
that you set.
HTTP Event Server: Select Enable to enable the Http server for the camera.
- URL: Enter the IP address of the HTTP server.
- HTTP Port: Set port number of HTTP server.
- User Name: Enter the user name to login into the HTTP server.
- Password: Enter the password to login into the HTTP server.
NOTE Due to the network environment, the camera may not upload number of images
that you set.
5.5.2 Event Schedule
This menu is used to specify the schedule of Event or Schedule Trigger and activate the
some actions provided by this device. Where the Schedule Trigger will be activated by
user-define interval without event happened.