AirLive POE-5010HD - Manual (Page 24)

5. Administrating the Device
AirLive POE-5010HD User’s Manual 21
System Setting
This function is only available for user logged into Network Camera as administrator.
You can access and manage the camera through the Web browser. This chapter describes
the Web Configuration, and guides you through the configuration of the camera by using
the Web browser.
To configure the camera, click on the Main screen of Web Configuration.
The Web Configuration contains the settings that are required for the camera in the left
menu bar, including Setup, Network, Audio/Video/Image, Security, Advance, and
Status.
Click on each menu name to display its setting page.
Item Action
Setup The Setup menu contains two sub-menus that provide the
system settings for the camera, such as the Camera Name,
Location, Date & Time, etc
Network The Network menu contains the networking related settings
for the camera, such as the IP Setting, DDNS Setting, IP
Filter, etc.
Image Adjust camera parameters, day & night.
Video Configure bit rate and frame rate of video profiles
Audio Configure audio parameters
Security The Security menu provides the required options for
administrator to control the camera for security purpose.
Advance The Advance menu contains five sub-menus that allow you
to set up the advanced feature of the camera, including the
event, event schedule, motion detection, recording, RS-485,
etc.
5
5.
Administrating the
Device