AirLive POE-5010HD - Manual (Page 45)

5. Administrating the Device
AirLive POE-5010HD User’s Manual 42
- ered. Please note
ation function, is connected to the camera.
n
on the
9.
W vent profile will be added to the Event list.
IP To change/remove the event profile, select the desired profile from the Event list and
te.
- Enable HTTP: The camera will send instant message to the HTTP server when
triggered.
GO Preset: The camera will move to the preset position when trigg
that the function is available only when a RS-485 device, such as an external
camera stand with rot
- Enable SD CARD: The camera will store the attachment to the SD card whe
triggered.
- Trigger digital output: The camera will trigger the connected device
camera’s output for 1~60 seconds (according to the setting of the pull-down menu).
hen done, click Add. The e
T
then click Modify/Dele
5.5.3 Motion Detection