5 enable/disable commands – AirLive WHA-5500CPE-NT User Manual
Page 101
6. Command Line Interface
95
AirLive WHA-5500CPE-NT User’s Manual
6.5 Enable/Disable Commands
Commands to enable or disable settings
( enable/disable ): <enable | disable> upnp
Purpose: To enable or disable UPnP
Example:
Command>enable upnp
(Upnp)descDocName: BD.xml
UPnP Daemon: Intializing UPnP with descDocUrl=http://192.168.1.1:80/BD.xml
UPnP Daemon: ipaddress=192.168.1.1 port=80
UPnP Daemon: conf_dir_path=/var/upnp
Initializing UPnP SDK ...
UPnP SDK Successfully Initialized.
Setting the Web Server Root Directory to /var/upnp
Succesfully set the Web Server Root Directory.
UpnpGetServerPort(): 49152
Registering the root device with descDocUrl http://192.168.1.1:49152/BD.xml
IGD root device successfully registered.
Advertisements Sent. Listening for requests ...
Command> disable upnp
Shutting down on signal 15...
UPnP is disabled
<enable | disable> syslogd
Purpose: To enable or disable syslog
Example:
Command> enable syslogd
Invalid configuration specified.
Command> disable syslogd
Syslogd is disabled
<enable | disable> radius server <primary | secondary>
Purpose: To enable or disable primary/secondary radius server
Example:
Command> enable radius server primary
Invalid configuration specified.
Command> enable radius server secondary
Invalid configuration specified.