AirLive WHA-5500CPE-NT - Manual (Page 111)

7. Application Example: Infrastructure
105 AirLive WHA-5500CPE-NT User’s Manual
3. Enter “for client” in description
4. Select “IP Segment. Enter 192.168.1.100 for IP, and “255.255.255.248” for
subnet mask.
5. Enter 2048 for downlink and 512 for uplink
6. Click on “Add” to add the bandwidth policy.
Note: Because the Bandwidth Control will limit devices on both wireless and Ethernet
side, it is recommended to set the IP address of Ethernet side to have a larger IP scope so
it will not be limited by the IP segment policy. In this example, please set the devices on
the Ethernet side to have subnet mask of 255.255.255.0.
1
2
3
4
5
6