AirLive WHA-5500CPE-NT - Manual (Page 86)

6. Command Line Interface
AirLive WHA-5500CPE-NT User’s Manual 80
In this chapter, we will explain commands that are available through Telnet interface. We
will provide descriptions for the commands, example settings and the WHA-5500CPE-NT’s
response. The purpose for this chapter is to introduce available CLI commands only.
For detail descriptions on the concept and application of the settings, please refer to
chapter 4 and chapter 5.
Before reading this chapter, please go through Section 3.3 of Chapter 3. It contains
information on how to login Telnet. For quick reference, the login and password is as
bellowed:
„
Telnet
‰ Password: airlive
You can get a list of available commands by typing “help” at the command prompt.
You must remember to save the configurations by typing “save
config” at the command prompt after making changes, otherwise, the
configuration will be lost after reboot.
6.1 System Commands
„ ping <IP address>
‰ Purpose: to ping a remote IP address
‰ Example:
Command> ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1): 56 data bytes
64 bytes from 192.168.1.1: icmp_seq=0 ttl=64 time=1.8 ms
64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=1.0 ms
„ change password
‰ Purpose: Change login password
‰ Example:
Command> change password 123
password is set to: 123
6
6.
Command Line Interface
This is the command
Here explains the usage
of the command
Example
command and
response