AirLive WHA-5500CPE-NT - Manual (Page 140)

11. Frequent Asked Questions
AirLive WHA-5500CPE-NT User’s Manual 134
In this chapter, we will address some frequent asked questions about WHA-5500CPE-NT
Question
: I forgot my password or the IP address of WHA-5500CPE-NT.
Answer: Please restore your settings to default by press the reset button for more than
5 seconds. You should be able to find your WHA-5500CPE-NT at
192.168.1.1 with password “airlive”.
====================================================================
Question
: Where is Super Channels for WHA-5500CPE-NT?
Answer: Please make sure you have the license to use the Super Channels. Super
Channel is only available when you select 11a, Super-A, and Turbo-A modes.
When you select “All Channels” as the Regulatory Domain, the Super
Channels will appear on your channel list.
====================================================================
Question
: I heard WHA-5500CPE-NT can limit the bandwidth of BitTorrent and eDonkey
traffic. But I don’t see the option on the Bandwidth Control.
Answer: The option to limit bandwidth by application or port is available only on WISP
router and AP Router modes.
====================================================================
Question
: How can I make connection with Mikrotik AP?
Answer: The WHA-5500CPE-NT can connect with Mirkrotik AP using Bridge
Infrastructure Mode(Supports WEP, WPA-PSK, WPA2-PSK), Client
Infrastructure mode (support WEP, WPA-PSK, WPA2-PSK) and WDS Bridge
mode (support WEP). If using Bridge Infrastructure mode (WDS station),
11
11.
Frequent Asked
Questions