2 device a bandwidth management – AirLive WHA-5500CPE-NT User Manual
Page 110
7. Application Example: Infrastructure
AirLive WHA-5500CPE-NT User’s Manual
104
7.2.2 Device A Bandwidth Management
This purpose is to limit the bandwidth of each wireless client in “airliveclient” network to
have a download bandwidth of 2048kbps and upload speed of 512kbps. We should set
the policy as followed.
Set the Per-User Bandwidth Control by “IP Segment”. The IP segment here has
address of 192.168.1.100 with subnet mask of 255.255.255.248. The available host
IP addresses will be 192.168.1.96 to 192.168.1.02. If you are not familiar with IP
subnet calculation, please use an on-line IP calculator. Here is an example link:
Set the uplink as 512kbps, downlink as 2048mbps
Step 1 Select the “Bandwidth Control” from the “Operation Mode->Setup” menu
Step 2 Once you have entered the Bandwidth Control menu, please follow the steps
below
1. Enable Bandwidth Control
2. Select “Per-User Bandwidth Control.
1
2
3
4