AirLive WHA-5500CPE-NT - Manual (Page 107)

7. Application Example: Infrastructure
101 AirLive WHA-5500CPE-NT User’s Manual
Device B: WHA-5500CPE-NT in Bridge Infrastructure Mode
‰
Using Total bandwidth Control to limit the Bridge traffic to 10Mbps both way.
‰ Use Site Survey wizard to make the connection in a simple one stop process.
Device C: WHA-5500CPE-NT in Client Infrastructure Mode
‰
Connect to the Access Point using Client Infrastructure Multiple User mode.
‰ Use Site Survey to connect and associate with the AP.
7.2 Device A: Access Point Mode
The configuration of Device A involves the followings:
‰
Using multiple SSID to create 2 wireless network
„ airliveclient: A network for wireless clients with WPA-PSK security policy.
„ bridgeinf: A bridge network with WPA-PSK2 security policy
‰
Enable Per-User bandwidth Control for the “airliveclient” network
„ The wireless client network will be limited to a subnet of 6 IP addresses.
„ Each IP address will be limited to 512Kbps upload and 2Mbps download speed.
SSID: airliveclient
Encryption:
WPA-PSK
Distance: 2000m
SSID: bridgeinf
Encryption:
WPA-PSK2
Distance: 2000m