AirLive WHA-5500CPE-NT User Manual
Page 95
6. Command Line Interface
89
AirLive WHA-5500CPE-NT User’s Manual
Using /lib/modules/2.4.25-LSDK-5.1.0.42/wlan/ath_ahb.o
<mapping sub-ioctl turbo to cmd 0x8BE0-1>
<mapping sub-ioctl set_installmode to cmd 0x8BE0-75>
<mapping sub-ioctl set_threslower to cmd 0x8BE0-76>
<mapping sub-ioctl set_threslow to cmd 0x8BE0-77>
<mapping sub-ioctl set_thresbetter to cmd 0x8BE0-78>
<mapping sub-ioctl set_thresbest to cmd 0x8BE0-79>
<mapping sub-ioctl maccmd to cmd 0x8BE0-17>
RTNETLINK answers: No such file or directory
RADIUS Server Reattempt Period: 20 Seconds
set telnet port <port number, 1-65535>
Purpose: change the telnet port numer
Example:
Command> set telnet port 23
Changing telnet port may cause current telnet connections to be lost.
Are you sure ? ( y/n ) : y
Telnet port number: 23
set telnet timeout <timeout value in minutes, 0-999, 0 for no limit>
Purpose: Set Telnet management timeout
Example:
Command> set telnet timeout 10
Changing telnet timeout may cause current telnet connections to be lost.
Are you sure ? ( y/n ) : y
Telnet session timeout: 10 minutes
set wmm qos <enable | disable>
Purpose: Enable or Disable WMM QoS
Example:
Command> set wmm qos disable
set wmm qos disable successful!
set log level <1-7>
Purpose: Set the log level
Example:
Command> set log level 7
set log level 7 successful