AirLive WHA-5500CPE-NT - Manual (Page 83)

5. Web Management2: System Configuration, Tools and Status
77 AirLive WHA-5500CPE-NT User’s Manual
5.3 Device Status
When you click on the “Device Status” on the top menu bar, the sub menu for device status
will appear.
5.3.1 Device Information
This page shows the general information about WHA-5500CPE-NT such as firmware
version, device IP/MAC, WAN IP/MAC(in router modes), Gateway IP(in router modes),
DNS IP…etc. Below are some additional explanations on some status information of this
page:
„
CPU Loading Display the CPU usage.
„ Memory Information Display how much memory is used and free.
„ Firmware version: The first WHA-5500CPE-NT firmware release is 1.00e10. In
general, AirLive will refer to its firmware as exx (such as e10) version on the release
note
„ Wireless MAC: This is the wireless MAC address (BSSID) of this AiMax5. This is the
address to enter on the remote WDS Bridge for the WDS link.
„ Uptime: This is the time that the WHA-5500CPE-NT has been running since last
power up.
„ ARP Table Display the corresponding IP and MAC address Table.