AirLive WHA-5500CPE-NT - Manual (Page 35)

4. Web Management-Wireless and WAN Settings
29 AirLive WHA-5500CPE-NT User’s Manual
In this chapter, we will explain about the wireless settings and router mode settings in web
management interface. Please be sure to read through Chapter 3’s “Introduction to Web
Management” and “Initial Configurations” first. For system configurations, device status,
and other non-wireless related settings; please go to Chapter 5.
4.1 About WHA-5500CPE-NT’s Menu Structure
The WHA-5500CPE-NT’s web management menu is divided into 3 main menus: Operation
Modes, System Configurations, and Device Status. The main menus are displayed in
“Top Menu Bar”. Within each main menu category, there are sub-menu options which are
displayed on the “Side Menu Bar”
„ Operation Mode: This menu is where you will find wireless and WAN settings.
The WHA-5500CPE-NT’s wireless settings are dependant on the wireless
operation mode you choose; only the applicable wireless settings for selected
operation mode are shown. For example; WAN port setting is available only for
AP Router and WISP Router mode, it will only be shown in those modes. To access
wireless settings, click on the “Setup” button within each operation mode. For
explanation on different wireless modes, please refer to Chapter 1. We will talk
about functions in this menu for this chapter.
„ System Configuration: All settings besides Wireless and WAN functions are in
this category. The system configuration including changing password, upload
firmware, backup configuration, settings PING watchdog, and setting management
interface. We will talk about this menu’s function in Chapter 5.
4
4.
Web Management:
Wireless and WAN
Settings
Side Menu Bar: Sub Menus
Language Bar
TOP Menu Bar: Main Menus