AirLive WHA-5500CPE-NT - Manual (Page 94)

6. Command Line Interface
AirLive WHA-5500CPE-NT User’s Manual 88
6.4 Set Commands
The Set Commands are to make changes to the WHA-5500CPE-NT’s settings
„ set http timeout <timeout value in minutes, 1-999>
‰ Purpose: Set the timeout value for HTTP management
‰ Example:
Command> set http timeout 10
HTTP timeout: 10 minutes
„ set system <contact |location> <string up to 60 characters>
‰ Purpose: Set the system’s location and contact info
‰ Example:
Command> set system location 60
System Location: 60
„ set system name <string up to 32 characters>
‰ Purpose: Set system’s name
‰ Example:
Command> set system name airlive
System Name: airlive
„ set mac filter mode <MAC filter mode, disabled/grant/deny>
‰ Purpose: Set MAC filter mode or disable MAC filtering.
‰ Example:
Command> set mac filter mode disabled
mac filter mode is set to disabled
„ set radius server reattempt <reattempt interval in minutes, now no limit
in seconds>
‰ Purpose: set radius server reattempt interval in minutes
‰ Example:
Command> set radius server reattempt 20
/etc/wlan/ap_service: 17: uname: not found
killall: wpa_supplicant: no process killed
/etc/wlan/ap_service: 17: uname: not found
Using /lib/modules/2.4.25-LSDK-5.1.0.42/wlan/ath_hal.o
Using /lib/modules/2.4.25-LSDK-5.1.0.42/wlan/ath_rate_atheros.o
Using /lib/modules/2.4.25-LSDK-5.1.0.42/wlan/ath_dfs.o