Garland MO QU 28000 FL INDUCTION MODULE-LINE COOKTOPS DUAL/QUAD - Manual (Page 42)

Cleaning RTCSmp Built-In Module-Line Dual/Quad Cooktops
42 Part # 4532415 Rev 3 (8/19/14)
7 Cleaning
The cleaning of the Ceran glass is identical to cleaning other similar
glass surfaces. You may use any regular glass cleaning products
available from a hardware store.
CAUTION
Ensure NO LIQUID CAN ENTER into the induction
unit. Do not let water or food overflow the cooking
area. Do not use hoses to clean or power wash the
induction unit or its vicinity.
IMPORTANT
 DO NOT USE: corrosive or abrasive cleaning agents, such as grill sprays, oven sprays, stain removers, rust
removers, scouring powder, and rough sponges.
 Let the Ceran glass-top cool down before cleaning.
 Ensure to remove all residues of cleaning agents from the glass-top. Use a clean moist cloth to wipe off
any such residues.
IMPORTANT Air Intake Filter
We recommend using an air intake filter in your installation. A dirty, blocked air intake filter can cause
electronic damage to the induction unit. Ensure you check and clean the filter at least once a week or as
often as required. Wipe the filter dry before inserting it back into the holder.
Glass and Body Cleaning
1. Use razor blade scraper or non-scratching sponge to remove all residues on the glass.
 When scraping, ensure you angle
your razor blade scraper at about
20
o to 30 o from the glass.
2. Wipe the glass clean with a damp cloth.
3. To clean the stainless steel body, use regular stainless steel cleaners available from a hardware store.
Visual Inspection of Silicone Seal
Check the silicone seal around the glass. Call service as soon as possible if you notice:
 Cracks on the silicone seal.
 The silicone seal comes away from the glass or moves when you press down on the seal.
When the silicone seal is broken, water penetration can cause the induction unit to fail and the
malfunction can cause personal harm.
20 o - 30 o