HYDAC CMU 1000 - Manual (Page 118)

Condition Monitoring Unit CMU 1000 Page 118
Revised 17.12.2009 HYDAC ELECTRONIC GMBH Mat.-No.: 669749
9.6 Analog Outputs
Quantity: 2
Type: individually selectable, current (4 .. 20 mA) or voltage (0 .. 10 V)
9.7 Digital Outputs
Quantity: 4
Type: Relay output, directional contact
Switching power: 30 V DC / 1 A
9.8 Calculation Unit
Analog value acquisition: 12 Bit A/D transmitter
Internal measured value memory:
- RAM: 1 MByte
- Flash Memory 256 kByte
Real-time clock, battery-buffered (battery change only by HYDAC SERVICE GMBH)
9.9 Interfaces
9.9.1 Keyboard
- 4 arrow keys (up, down, right, left)
- OK key
- ESC key
9.9.2 View
Two-line LED display (2x16 characters) with background illumination. Status
information can also be displayed via 3 different colored LEDs.
9.9.3 USB Mass Storage Device
USB 1.1 / USB 2.0 full speed interface for connection of a Mass Storage Device
(Memory Stick); connection socket Type "A".
The data recorded by the CMU can be transferred to a memory stick via this interface.
The USB host supports exclusively Mass Storage Devices.
9.9.4 Ethernet
The calculation unit is equipped with an RJ 45 8/8 Ethernet interface which supports
the following services/protocols:
- HTTP Server
- OPC Client