HYDAC CMU 1000 - Manual (Page 120)

Condition Monitoring Unit CMU 1000 Page 120
Revised 17.12.2009 HYDAC ELECTRONIC GMBH Mat.-No.: 669749
9.14 Scope of Delivery
The CMU 1000 is packed in a box and delivered in ready-for-operation condition.
Check the packing and the device prior to installation for transport damage and the
contents of the packing for completeness.
- CMU 1000
- User manual
- CD-ROM with the PC software "CMWIN" as well as additional product information
- USB connection cable
9.15 Maintenance and cleaning
- Switch the CMU 1000 voltage-free and check it for absence of voltage.
- For reasons of electrical safety, never clean the device with water or other fluids,
and under no circumstances whatsoever should the device be immersed in water or
other fluids.
- Use only a dry, lint-free cloth for cleaning. Do not use any solvents, gasoline or
similar, because these would cause damage to the CMU 1000.
9.16 Recycling and Disposal
The packing and the packing material are comprised solely of environmentally friendly
materials. They can be disposed of in the respective local recycling containers.
Never dispose of electrical devices and electronic components in containers
intended for household refuse!
Pursuant to European Guideline 2002/96/EU concerning used electrical and electronic
devices and implementation in national law, used electrical devices must be collected
separately and transferred to an environmentally suitable recycling process.
Consult for this purpose a company that is certified for the disposal of electronic waste
in order to ensure that your device is recycled or disposed of in an environmentally
friendly manner.
10 Ordering Details
CMU 1000 - 000 - X
Operator guidance and documentation
D = German
E = English
F = French