INFICON T3000 Thermal Power Supply - Manual (Page 29)

T-3000 Thermal Power Supply instruments
Use of the T3000 with the
RS-3000 Page 4 - 2 Section 4
Indicators: There are nine LED-illuminated indicators. Some indicators show the mode
status:
PRGM (for program mode),
RMT (for remote mode), and
MAN (for manual mode).
CUR and MAX illuminated: Large display shows maximum current in Amps.
RAMP and MIN illuminated: Small display shows ramp time in minutes
RAMP and CUR illuminated: Large display shows ramp current in Amps.
Kw illuminated: Small display shows power output in kilowatts
INTERLOCK illuminated: There is a problem with the safety interlock that must be
resolved in order to operate the T3000 power supply.
Hand Controller/Pendant: A pendant may be attached to the RS-3000 front panel. The
pendant comes with a six foot long coiled cord. The pendant provides three keys for control
of the unit: INC, DEC and STOP.
Interconnect Cables: A cable is provided to connect the RS-3000 to the T3000, using the
15-pin D-Sub connectors on the units. Additional cables are available to connect the RS-
3000 to a Sycon controller or a PC.