T3000 – INFICON T3000 Thermal Power Supply User Manual
Page 37
T3000
Thermal Power Supply
instruments
Page 6 - 2
Section 6
Table 6-2
Inspection and Corrective Action
ITEM
INSPECT FOR
CORRECTIVE ACTION
Connector plugs and buss
bars
Loose, bent or corroded
contacts and buss bars.
Damage or improper seating
in mating connector.
Clean contacts and buss
bars with solvent moistened
cloth, soft bristle brush, small
vacuum or low compressed
air.
Chassis, fans & extruded
heatsinks
Dirt and corrosion
Replace damaged or
corroded connectors.
External electrical wiring
Broken, burned or pinched
wire. Frayed, worn or
missing insulation
Clean with cloth moistened
with soapy water.
External solder connections
Corrosion, loose, cracked, or
dirty connections
Repair or replace defective
wires.
Dirt and moisture buildup
Short circuits, arcing,
corrosion, overheating
Clean and resolder
connections.
T3000 enclosure
Dirt and corrosion
Clean as required with cloth
moistened with soapy water.