INFICON SKY CDG025D-X3 0.1 ... 1000 Torr / mbar process gauge - Manual (Page 18)

18 tina57e1 (2010-01)
4 Operation
Put the gauge into operation. If you are using an INFICON con-
troller, define the measurement range (
→ [1, 2, 3]).
A warm-up time of at least 15 minutes should be allowed; for
exact pressure measurements a warm-up time of at least
2 hours is required.
4.1 Displays
RUN ZERO
1 2 SP
LED State
Meaning
<RUN>
lit Measurement mode
flashing Other mode, error
<1> lit p ≤ setpoint level 1
flashing Adjusting setpoint <1>
<2> lit p ≤ setpoint level 2
flashing Adjusting setpoint <2>