INFICON SKY CDG025D-X3 0.1 ... 1000 Torr / mbar process gauge - Manual (Page 3)

tina57e1 (2010-01) 3
Validity
This document applies to products of the CDG025D, X3 series.
Part numbers of standard products are indicated below. OEM
products have other part numbers and different parameter
settings (e.g. factory setting of setpoint) as defined in the
corresponding ordering information.
Flange
1 ⇒ DN 16 ISO-KF
3 ⇒ DN 16 CF-R
9 ⇒ 1/2" tube
E ⇒ 8VCR female
3 ⇒ 0.1
4 ⇒ 0.25
5 ⇒ 0.5
6 ⇒ 1
7 ⇒ 2
8 ⇒ 5
9 ⇒ 10
A ⇒ 20
B
⇒ 50
C ⇒ 100
D ⇒ 200
E ⇒ 500
F ⇒ 1000 (Torr only)
G ⇒ 1100 (mbar only)
Unit
Measurement range
(F.S.)
5 ⇒ Torr
(x 133 Pa; x 1.3 mbar)
6 ⇒ mbar
(x 100 Pa)
0 ⇒ Standard
B ⇒ P control
3CB1-xxx-230x
The part number (PN) can be taken from the product nameplate.
If not indicated otherwise in the legends, the illustrations in this
document correspond to gauges with the DN 16 ISO-KF vacuum
connection. They apply to other vacuum connections by analogy.
We reserve the right to make technical changes without prior
notice. All dimensions in mm.