Kinze ISOBUS Electronics Package (4900) Rev. 4/14 - Manual (Page 27)

TM
ISOBUS M0250
Rev. 4/14 23
1. First, select insecticide option: Basic or Prescription.
2. Select desired rate of pounds per acre using the “+” or “-” buttons.
3. Tap on insecticide name window to select the insecticide being used.
Prescription rates come from the Task Controller which is commonly located inside the Virtual Terminal in the cab.
Prescription maps must be created in farm management software and loaded into the display prior to planting.
Rates supplied by the Task Controller will be displayed on the prescription screen. You must be on the prescription
screen to use the prescription rate.
The data boxes below the tractor and planter graphic show the set rate for your current location. Prescription rates will
only be used if prescription is selected in this screen.
NOTE: Selecting an insecticide name sets the product density which is used to determine the correct rate.
PRIME AND FLUSh
1. Select Prime or Flush to prime or flush insecticide
meters.
2. Prime will turn the meters one and a quarter
revolution. Flush will turn meters at a set rate until
Stop button is pushed.
3. If process is not ready to be performed, select
Back.
3:00 PM
ON
F
PAGES
E J
A
AUTOSWATH
C
FERTILIZER
25
h
DOWNFORCE
DEPTH
I
Lbs
NORM
2.5
D
INSECTICIDE
10
1 of 4
G
CROP TYPE
CORN
B
POPULATION
32.1
BACK PRIME FLUSH
EDIT
PRESCRIPTION BASIC
-NEW DATA ENTRY-
NAME
ON OFF
50 50
1. Press user level to select options
LBS / ACRE LBS / ACRE
INSECTICIDE
3. Name insecticide
2. Turn ON/OFF insecticide when rows are on and planting
Planting Setup
Press START to run all
insecticide meters.
They will operate until STOP is pressed.
INSECTICIDE FLUSh
BACK STOP
START
SET INSECTICIDE SCREENS