Kinze ISOBUS Electronics Package (4900) Rev. 4/14 - Manual (Page 47)

TM
ISOBUS M0250
Rev. 4/14 43
TOOL BAR SENSING
Settings
The tool bar position settings screen shows diagnostics for the tool bar position sensors. There are two sensors on the
planter. One is on each wing, located on a row unit close to the vacuum fan.
If the planter is lifted, both the right, left and overall state should read UP. If the planter is down, they should all read
DOWN. If one row unit is up, the state for that sensor should read UP, while the overall state should remain DOWN.
If this behavior is not seen, the sensor adjustment should be checked.