Insecticide – Kinze ISOBUS Electronics Package (4900) Rev. 4/14 User Manual
volumetric Flow Rate
This sets the cubic feet per revolution to calculate the insecticide meter speed.
No Flow Alarm Response Time
This sets the amount of time the alarm condition must exist before the visual and audible alarm comes up. If the
response time is set to 10 seconds, no flow will have to be seen on a particular row for more than 10 seconds before
an alarm will appear.
"Calibration Routine" on page 54
Enable Flow Sensor Alarm
This setting turns the individual flow sensor alarms on and off.
This screen also displays diagnostic information for insecticide which includes speed for each row, meter speed
for each row, and voltage coming from the sensor for each row. These will vary row to row when using turning