Kinze ISOBUS Electronics Package (4900) Rev. 4/14 - Manual (Page 49)

TM
ISOBUS M0250
Rev. 4/14 45
SEED DRIvE
Tap on the box in the VALUE column to adjust each setting. A number pad will appear to enter the desired setting.
Tire Diameter
This sets the diameter of the tire that has the planter speed sensor installed.
Gear Ratio
This sets the gear ration between the motor and meter.
Jump Start Pulses/Rev
This sets the amount of pulses per revolution for the planter speed sensor.
Turning Comp
This gives the operator the ability to enable or disable turning compensation.
Settings