System overview, Isobus system, Can-bus technology – Kinze ISOBUS Electronics Package (4900) Rev. 4/14 User Manual
Page 9: Pin connector, Isobus system can-bus technology 9-pin connector
ISOBUS provides a consistent user interface for planter functionality, regardless of the tractor brand that is pulling the
implement. The ISOBUS control system plugs into a compatible, existing monitor in the cab of the tractor. The existing
monitor becomes a Virtual Terminal (VT) for Kinze controls and monitoring.
The ISOBUS system uses Controller Area Network (CAN) technology. CAN systems are comprised of individual
modules, each with their own high speed processor, connected through a high-speed communications cable. CAN
has many benefits, including greater ability to configure and expand the system, compatibility, simpler installs with less
wiring and increased system dependability.
The 9-Pin round pin connector contains CAN, ECU power, solenoid power, and grounds .
NOTE: The displays used in this manual are from a John Deere virtual terminal. your
virtual terminal may vary slightly depending on the manufacturer.